[1] SAR F, MHIAOUI S, GASSER J G. Thermal conductivity of liquid lead-bismuth alloys, possible coolants for fourth generation spallation nuclear reactors[J]. Journal of Non-Crystalline Solids, 2007, 353(32-40): 3622-3627. [2] ZHANG J S. Lead-bismuth eutectic (LBE): A coolant candidate for Gen.Ⅳ advanced nuclear reactor concepts[J]. Advanced Engineering Materials, 2014, 16(4): 349-356. [3] WU Y C, CHEN Z B, HU L Q, et al. Identification of safety gaps for fusion demonstration reactors[J]. Nature Energy, 2016, 1: 16154-161164. [4] WU Y C, JIANG J Q, WANG M H, et al. A fusion-driven subcritical system concept based on viable technologies[J]. Nuclear Fusion, 2011, 51(10): 103036-103042. [5] 吴宜灿, 宋婧, 胡丽琴, 等. 超级蒙特卡罗核计算仿真软件系统SuperMC[J]. 核科学与工程, 2016, 36(1): 62-71. WU Yican, SONG Jing, HU Liqin, et al. Super Monte Carlo Simulation Program for nuclear and radiation process: Super MC[J]. Nuclear Science and Engineering, 2016, 36(1): 62-71. [6] 吴宜灿. 中国ADS铅基反应堆设计与研发进展[J]. Engineering, 2016, 2(1): 134-141. WU Yican.Design and R&D progress of China lead-based reactor for ADS research facility[J]. Engineering, 2016, 2(1): 134-141. [7] ZHANG J S. A review of steel corrosion by liquid lead and lead-bismuth[J]. Corrosion Science, 2009, 51(6): 1207-1227. [8] 田书建, 张建武. 316L和T91不锈钢在550 ℃静态铅铋合金中的腐蚀行为[J]. 中国科学技术大学学报, 2015, 45(9): 751-756. TIAN Shujian, ZHANG Jianwu. Corrosion behavior of 316L and T91 steels in stagnant lead-bismuth eutectic at 550 ℃[J]. Journal of University of Science and Technology of China, 2015, 45(9): 751-756. [9] LI H Q, BAI P W, LIN Z W, et al. Corrosion resistance in Pb-Bi alloy of 15-15Ti steel coated with Al2O3/SiC bilayer thin films by magnetron sputtering[J]. Fusion Engineering and Design, 2017, 125: 384-390. [10] SCHROER C, TSISAR V, WEDEMEYER O, et al. Corrosion in steel T91 caused by flowing lead-bismuth eutectic at 400 °C and 10-7 mass% solved oxygen[C]// Proceedings of the 24th International Conference on Nuclear Engineering, New York:ASME, 2016. [11] TIAN S J, JIANG Z Z, LUO L. Oxidation behavior of T91 steel in flowing oxygen-containing lead-bismuth eutectic at 500 °C[J]. Materials and Corrosion, 2016,67(12): 1274-1285. [12] 钱余海,李美栓.力学载荷作用下合金的高温氧化行为研究状况[J].腐蚀科学与防护技术,2001, 13(6): 342-346. QIAN Yuhai, LI Meishuan. A review on high temperature oxidation of alloys under mechanical loading[J]. Corrosion Science and Protection Technology, 2001, 13(6): 342-346. [13] WEISENBURGER A, HEINZEL A, MLLER G, et al. T91 cladding tubes with and without modified FeCrAlY coatings exposed in LBE at different flow, stress and temperature conditions[J]. Journal of Nuclear Materials, 2008, 376(3): 274-281. [14] YAMAKI E, KIKUCHI K. A stability of oxide layers formed in LBE on HCM12A to external loading[J]. Journal of Nuclear Materials, 2010, 398(1-3): 153-159. [15] 全国钢标准化技术委员会. GB/T 15970.1-1995 金属和合金的腐蚀应力腐蚀试验第1部分:试验方法总则[S]. 北京: 中国标准出版社, 1995. [16] 徐敬尧. 先进核反应堆用铅铋合金性能及纯净化技术研究[D]. 合肥: 中国科学技术大学, 2013. [17] WU Y C, BAI Y Q, SONG Y, et al. Development strategy and conceptual design of China Lead-based Research Reactor[J]. Annals of Nuclear Energy, 2016, 87: 511-516. [18] 王改英, 柏云清, 高胜, 等. 液态铅铋氧浓度测量技术初步研究[J]. 核科学与工程, 2012, 32(2): 165-169. WANG Gaiying, BAI Yunqing, GAO Sheng, et al. Preliminary study on the measurement technology of oxygen concentration in liquid lead bismuth[J]. Nuclear Science and Engineering, 2012, 32(2): 165-169. [19] 张敏, 吴斌, 高胜, 等. 温度对静态铅铋中氧浓度变化的影响[J]. 核科学与工程, 2014, 34(4): 488-493. ZHANG Min, WU Bin, GAO Sheng, et al. Effect of temperature on oxygen concentration change in static lead-bismuth eutectic[J]. Nuclear Science and Engineering, 2014, 34(4): 488-493. [20] 田书建, 姜志忠, 张敏, 等. T91钢在氧浓度为0.01 ppm静态铅铋合金中的界面腐蚀特征[J]. 原子能科学技术, 2017, 51(1): 158-164. TIAN Shujian, JIANG Zhizhong, ZHANG Min, et al. Interface corrosion characteristics of T91 steel in static lead-bismuth eutectic with 0.01 ppm oxygen[J]. Atomic Energy Science and Technology, 2017, 51(1): 158-164. [21] WEISENBURGER A, SCHROER C, JIANU A, et al. Long term corrosion on T91 and AISI1 316L steel in flowing lead alloy and corrosion protection barrier development: Experiments and models[J]. Journal of Nuclear Materials,2012, 415(3): 260-269. [22] SCHROER C, WEDEMEYER O, SKRYPNIK A, et al. Corrosion kinetics of Steel T91 in flowing oxygen-containing lead-bismuth eutectic at 450 °C[J]. Journal of Nuclear Materials, 2012, 431(1-3): 105-112. [23] MLLER G, SCHUMACHER G, ZIMMERMANN F. Investigation on oxygen controlled liquid lead corrosion of surface treated steels[J]. Journal of Nuclear Materials, 2000, 278(1): 85-95. [24] 李美栓. 金属的高温腐蚀[M]. 北京: 冶金工业出版社, 2001: 201-210. [25] 周长海, 马海涛, 王来. 外加应力下合金高温氧化膜的生长及其失效愈合研究现状[J]. 腐蚀科学与防护技术, 2010, 22(6): 558-562. ZHOU Changhai, MA Haitao, WANG Lai. A review on oxide-scale growth, failure and its healing behavior during high temperature oxidation of alloys[J]. Corrosion Science and Protection Technology, 2010, 22(6): 558-562.
() () |