中国科学技术大学学报 ›› 2012, Vol. 42 ›› Issue (1): 47-51.DOI: 10.3969/j.issn.0253-2778.2012.01.008

• 原创论文 • 上一篇    下一篇

大气压下多孔陶瓷内放电的特征

倪卫洁   

  1. 中国科学技术大学热科学和能源工程系,安徽合肥 230027
  • 收稿日期:2011-09-29 修回日期:2011-12-22 出版日期:2012-01-31 发布日期:2012-01-31

Characteristics of discharge in porous ceramics at atmospheric pressure

NI Weijie   

  1. Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China
  • Received:2011-09-29 Revised:2011-12-22 Online:2012-01-31 Published:2012-01-31
  • Contact: LI Hui
  • About author:LI Weijie, male, born in 1985, master. Research field: non-thermal plasma. E-mail: nwj@mail.ustc.edu.cn

摘要: 在外加交流高压的条件下,多孔陶瓷内可以产生稳定的大气压微放电.通过对放电的图片以及电压、电流的分析得出微放电的部分物理特性.结果显示:陶瓷微孔内的微放电并不是由陶瓷的表面放电转变而成;多孔陶瓷孔内微放电的起始放电电压随着陶瓷厚度增加而升高,而随着多孔陶瓷孔隙率的增加而降低.

关键词: 微放电, 多孔陶瓷, 表面放电, 低温等离子体

Abstract: The microdischarges generated inside porous ceramics by AC high voltage represent a novel way to create stable atmospheric pressure plasmas. The physical characteristics of discharge in porous ceramics were investigated by photographic visualization and electrical measurements. Experimental results show that the surface discharge is not converted into pore microdischarges, and the onset voltage of pore microdischarges increases with the thickness of ceramics, while significantly decreasing with increasing porosity of ceramics.

Key words: microdischarge, porous ceramics, surface discharge, non-thermal plasma