聚丙烯酸基polyHIPEs的辐射和氧化还原引发聚合制备及其吸附性能研究

doi:10.3969/j.issn.0253-2778.2020.08.011

中国科学技术大学学报 ›› 2020, Vol. 50 ›› Issue (8): 1116-1123.DOI: 10.3969/j.issn.0253-2778.2020.08.011

聚丙烯酸基polyHIPEs的辐射和氧化还原引发聚合制备及其吸附性能研究

宋元瑞，刘华蓉，崔晓玲，邰晨，陈维健，吕志俊

收稿日期:2020-06-24 修回日期:2020-08-03 接受日期:2020-08-03 出版日期:2020-08-31 发布日期:2020-08-03
通讯作者: 刘华蓉
作者简介:宋元瑞，男，1996年生，硕士生. 研究方向：中空微球和多孔材料的制备与应用. E-mail: syr@mail.ustc.edu.cn
基金资助:
国家自然科学基金(51373160)资助.

Preparation and adsorption property of poly（acrylic acid）-based polyHIPEs through polymerization of O/W HIPE induced by γ-ray radiation and REDOX system

SONG Yuanrui, LIU Huarong, CUI Xiaoling, TAI Chen, CHEN Weijian, LYU Zhijun

Received:2020-06-24 Revised:2020-08-03 Accepted:2020-08-03 Online:2020-08-31 Published:2020-08-03

摘要/Abstract

摘要： 利用γ射线辐射和氧化还原体系分别引发正相高内相乳液（oil-in-water high internal phase emulsions，O/W HIPE）聚合，制备了一种多孔的聚丙烯酸基（polymerized high internal phase emulsions,polyHIPEs）.与用作水凝胶的普通干胶材料相比，该法制备出的polyHIPEs具有较高的孔隙率与较为规整的孔结构，而且通过调节HIPE的内相体积，可以获得具有不同孔隙大小的polyHIPEs材料.通过扫描电镜（scanning electronic microscope,SEM）观察，发现γ射线辐射聚合得到的polyHIPEs比氧化还原引发体系得到的具有更有序、更完整的多孔结构.对亚甲基蓝（methylene blue,MB）的吸附测试结果表明，相比化学法制备的样品，辐射法得到的polyHIPEs材料具有更快的吸附速率和更高的饱和吸附量，在250 mg/L亚甲基蓝溶液中，辐射聚合48 h （吸收剂量为151.2 kGy）的样品R-25-48每克可吸附高达1175.9 mg的亚甲基蓝；而辐射聚合8 h （吸收剂量为25.2 kGy）的样品R-25-8的饱和吸水率则高达近120倍.这意味着γ射线辐射聚合过程影响着材料的结构和性能.利用吸附等温线及动力学模型对γ射线辐射聚合制得的polyHIPEs材料的吸附实验结果进行拟合，发现吸附等温线拟合结果较为符合Langmuir模型，动力学拟合结果更符合拟二级动力学模型，这表明吸附机理为单分子层吸附，而吸附过程以化学吸附为主.

关键词: 多孔材料, 正相高内相乳液, 丙烯酸, 辐射聚合, 亚甲基蓝的吸附

Abstract: Porous poly（acrylic acid）-based polyHIPEs were prepared by the polymerization of oil-in-water high internal phase emulsions （O/W HIPEs） initiated by γ-ray radiation and redox system, respectively. Compared with normal dried gel materials used as hydrogels, polyHIPEs prepared from O/W HIPEs have higher porosity and a more uniform pore structure, and their pore sizes can be adjusted by changing internal phase volume. Observed by scanning electron microscope （SEM）, polyHIPEs obtained by γ-ray radiation polymerization were found to have a more ordered and completly porous structure than those obtained by redox initiation system. The adsorption tests of methylene blue （MB） on different samples showed that compared with those prepared by chemical method, polyHIPEs obtained by radiation method had a faster adsorption rate and a higher saturation adsorption capacity. The sample R-25-48 of γ-ray radiation polymerization for 48 h with an absorption dose of 151.2 kGy could adsorb up to 1175.9 mg of methylene blue per gram in 250 mg/L methylene blue solution, and the sample R-25-8 of radiation polymerization for 8 h with an absorbed dose of 25.2 kGy could absorb a lot of water, up to nearly 120 times its original weight, which means that theγ-ray radiation polymerization process affects the structure and properties of polyHIPE materials. The adsorption isotherms and kinetics models were used to fit the adsorption experimental results of MB on polyHIPEs obtained by γ-ray radiation polymerization. It is found that adsorption isotherm fits the Langmuir model and adsorption kinetics conforms to pseudo-second-order model, which indicates that the adsorption process is dominated by chemisorption with the mechanism of monolayer adsorption.

Key words: porous materials, oil-in-water high internal phase emulsions, acrylic acid, radiation polymerization, methylene blue adsorption

中图分类号:

O644

宋元瑞，刘华蓉，崔晓玲，邰晨，陈维健，吕志俊. 聚丙烯酸基polyHIPEs的辐射和氧化还原引发聚合制备及其吸附性能研究[J]. 中国科学技术大学学报, 2020, 50(8): 1116-1123.

SONG Yuanrui, LIU Huarong, CUI Xiaoling, TAI Chen, CHEN Weijian, LYU Zhijun. Preparation and adsorption property of poly（acrylic acid）-based polyHIPEs through polymerization of O/W HIPE induced by γ-ray radiation and REDOX system[J]. Journal of University of Science and Technology of China, 2020, 50(8): 1116-1123.

参考文献

［1］ BURDICK J A, PRESTWICH G D. Hyaluronicacid hydrogels for biomedical applications[J]. Advanced Materials, 2011, 23(12): H41-56.
[2] CHANG Z, CHEN Y, TANG S, et al. Construction of chitosan/polyacrylate/graphene oxide composite physical hydrogel by semi-dissolution/acidification/sol-gel transition method and its simultaneous cationic and anionic dye adsorption properties[J]. Carbohydrate Polymers, 2020, 229: 115431.
[3] XU C, YAN Y, TAN J, et al. Biodegradablenanoparticles of polyacrylic acid–stabilized amorphous CaCO3 for tunable pH-responsive drug delivery and enhanced tumor inhibition[J]. Advanced Functional Materials, 2019, 29(24): 1808146.
[4] OMIDIAN H, ROCCA J G, PARK K, et al. Advances in superporous hydrogels[J]. Journal of Controlled Release, 2005, 102(1): 3-12.
[5] MIKOS A G, SARAKINOS G, LEITE S M, et al. Laminated three-dimensional biodegradable foams for use in tissue engineering[J]. Biomaterials, 1993, 14(5): 323-330.
[6] CHEN J, PARK H, PARK K, et al. Synthesis of superporous hydrogels: hydrogels with fast swelling and superabsorbent properties[J]. Journal of Biomedical Materials Research, 1999, 44(1): 53-62.
[7] KATO N, SAKAI Y, SHIBATA S, et al. Wide-range control of deswelling time for thermosensitive poly(N-isopropylacrylamide) gel treated by freeze-drying[J]. Macromolecules, 2003, 36(4): 961-963.
[8] BARBY D, HAQ Z. Low density porous cross-linked polymeric materials and their preparation and use as carriers for included liquids: US4522953[P]. 1985-06-11.
[9] AHMED E M. Hydrogel: Preparation, characterization, and applications: A review[J]. Journal of Advanced Research, 2015, 6(2): 105-121.
[10] NHO Y, PARK J, LIM Y, et al. Preparation ofpoly(acrylic acid) hydrogel by radiation crosslinking and its application for mucoadhesives[J]. Polymers, 2014, 6(3): 890-898.
[11] LANGMUIR I.The constitution and fundamental properties of solids and liquids. Part I. Solids[J]. Journal of the American Chemical Society, 1916, 38(11): 2221-2295.
[12] FREUNDLICH, H.M.F. Over theadsorption in solution[J]. The Journal of Physical Chemistry, 1906, 57: 385-370.
[13] HO Y. Citation review of Lagergren kinetic rate equation on adsorption reactions[J]. Scientometrics, 2004, 59(1): 171-177.
[14] HO Y. Review of second-order models for adsorption systems[J]. Journal of Hazardous Materials, 2006, 136(3): 681-689.
[15] LESSA E F, GULARTE M S, GARCIA E S, et al. Orange waste: A valuable carbohydrate source for the development of beads with enhanced adsorption properties for cationic dyes[J]. Carbohydrate Polymers, 2017, 157: 660-668.
[16] MELO B C, PAULINO F A, CARDOSO V A, et al. Cellulose nanowhiskers improve the methylene blue adsorption capacity of chitosan-g-poly(acrylic acid) hydrogel[J]. Carbohydrate Polymers, 2018, 181: 358-367.
[17] LIU Y, ZHENG Y, WANG A, et al. Enhanced adsorption of Methylene Blue from aqueous solution by chitosan-g-poly (acrylic acid)/vermiculite hydrogel composites[J]. Journal of Environmental Sciences, 2010, 22(4): 486-493.
[18] SARKAR N, SAHOO G, SWAIN S K. Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent[J]. Materials Chemistry and Physics, 2020, 250: 123022.
[19] YAO G, BI W, LIU H, et al. pH-responsive magnetic graphene oxide/poly(NVI-co-AA) hydrogel as an easily recyclable adsorbent for cationic and anionic dyes[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 588: 124393.
[20] WANG W, WANG J, ZHAO Y, et al. High-performance two-dimensional montmorillonite supported-poly(acrylamide-co-acrylic acid) hydrogel for dye removal[J]. Environmental Pollution, 2020, 257: 113574.
[21] ZHENG X, ZHENG H, XIONG Z, et al. Novel anionic polyacrylamide-modify-chitosan magnetic composite nanoparticles with excellent adsorption capacity for cationic dyes and pH-independent adsorption capability for metal ions[J]. Chemical Engineering Journal,2020, 392: 123706.
[22] LI Y, HOU X, PAN Y, et al. Redox-responsive carboxymethyl cellulose hydrogel for adsorption and controlled release of dye[J]. European Polymer Journal, 2020, 123: 109447.
[23] ZHAO Y, ZHAO Z, ZHANG J, et al. Gemini surfactant mediated HIPE template for the preparation of highly porous monolithic chitosan-g-polyacrylamide with promising adsorption performances[J]. European Polymer Journal, 2019, 112: 809-816.

()
()

聚丙烯酸基polyHIPEs的辐射和氧化还原引发聚合制备及其吸附性能研究

Preparation and adsorption property of poly（acrylic acid）-based polyHIPEs through polymerization of O/W HIPE induced by γ-ray radiation and REDOX system

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价