中国科学技术大学学报 ›› 2011, Vol. 41 ›› Issue (5): 408-413.DOI: 10.3969/j.issn.0253-2778.2011.05.005

• 原创论文 • 上一篇    下一篇

基于硝酸盐为前驱体的溶胶凝胶法 制备CuInSe2薄膜

陈祥洲   

  1. 中国科学技术大学材料科学与工程系,安徽合肥 230026
  • 收稿日期:2011-03-01 修回日期:2011-04-21 出版日期:2011-05-31 发布日期:2011-05-31
  • 通讯作者: 刘伟丰
  • 作者简介:陈祥洲,男,1984年生,硕士生. 研究方向:CuInSe2薄膜太阳能电池. E-mail: chenxz@mail.ustc.edu.cn
  • 基金资助:
    中国科学院知识创新工程(KJCX-YW-M11)资助.

CuInSe2 thin films synthesized by sol-gel method with nitrates as precursors

CHEN Xiangzhou   

  1. Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China
  • Received:2011-03-01 Revised:2011-04-21 Online:2011-05-31 Published:2011-05-31

摘要: 采用低成本的无机盐为前驱体,通过溶胶凝胶法制备了高质量的黄铜矿结构CuInSe2太阳能电池光吸收层薄膜.先将制备得到的溶胶通过旋涂甩胶的方法成膜,再先后置于氢气中还原和在硒蒸气中进行硒化处理,即可得到所需薄膜.通过XRD,XRF,SEM和Raman散射等对材料的结构和形貌进行表征.结果表明:采用这种简单的方法所制备的薄膜除了具备平整度好、结晶度高和致密性好等优点外,Raman散射还表明薄膜表面不存在Cu2-xSe等杂相,上述优点非常有利于后续高质量的薄膜太阳能电池的制作.最后,讨论了CuInSe2薄膜中分层现象的产生以及形成机理.

关键词: 溶胶凝胶, 硝酸盐, 铜铟硒, 硒化

Abstract: High quality chalcopyrite CuInSe2 films were synthesized by a non-vacuum solution method using nitrates as sources for low-cost photovoltaic applications. The solution based on nitrates was used for precursor films by the spin-coating process, and sequential reduction and selenization treatments were performed with hydrogen and Se vapor, respectively. Through X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscope (SEM) and Raman scatting measurements, it was found that uniform, high crystalline and crack-free films were obtained using this simple method. Also, the films exhibited Cu2-xSe secondary phase free property, indicating the excellent quality of the synthesized CuInSe2 thin films. Finally, the phenomenon and mechanism of the two-layered structure formation of the synthesized CuInSe2 thin film were discussed.

Key words: sol-gel, nitrates, CuInSe2, selenization