3D打印制备核素分布高度均匀的弥散型陶瓷核燃料芯块

doi:10.3969/j.issn.0253-2778.2020.04.007

中国科学技术大学学报 ›› 2020, Vol. 50 ›› Issue (4): 436-441.DOI: 10.3969/j.issn.0253-2778.2020.04.007

3D打印制备核素分布高度均匀的弥散型陶瓷核燃料芯块

廉超，郭林，常振旗

中国科学技术大学物理学院，安徽合肥 230026

收稿日期:2019-03-11 修回日期:2019-04-12 接受日期:2019-04-12 出版日期:2020-04-30 发布日期:2019-04-12
通讯作者: 常振旗
作者简介:廉超，男，1995年生，硕士. 研究方向：核燃料循环. E-mail: lian521@mail.ustc.edu.cn
基金资助:
国家自然科学基金(91226109)资助.

Fabrication of dispersion ceramic nuclear fuel pellets with a highly uniform distribution of nuclide by 3D printing

LIAN Chao, GUO Lin,CHANG Zhenqi

School of Physical Sciences, University of Science and Technology of China, Hefei 230026, China

Received:2019-03-11 Revised:2019-04-12 Accepted:2019-04-12 Online:2020-04-30 Published:2019-04-12

摘要/Abstract

摘要： 核燃料微球在弥散型核燃料芯块中的分布均匀性对核燃料芯块的性能影响很大，是高性能核燃料的重要参数之一.提出了一种提高可裂变核素在芯块中分布均匀性的弥散型核燃料制备方法.首次提出将基于选择性激光烧结技术（selective laser sintering,SLS）的3D打印技术应用于弥散型陶瓷核燃料的制备，显著提高了核燃料微球在惰性弥散介质中的分布均匀性.详细描述了双组分陶瓷材料的3D打印技术路线的实现，并对惰性介质氧化镁的粒径、激光扫描参数和后处理过程与燃料芯块性能间的关系开展了研究.研究制备的核燃料芯块的截面图表明核燃料微球在芯块中的分布高度均匀.

关键词: 弥散型核燃料芯块, 核素分布, 3D打印, 选择性激光烧结技术

Abstract: The distribution of nuclear particles in dispersion-type nuclear fuel pellets is a crucial property since it strongly influences in-pile fuel behaviors. A way of improving the distribution of the fissile elements in the dispersion-type nuclear fuel pellets was presented. In this study, the selective laser sintering (SLS) was introduced to the fabrication of the dispersion nuclear fuel pellets to ensure a highly uniform distribution of the nuclear fuel microspheres in the pellet. A detailed technical route and fabrication processes was described. The effect of the size of MgO particle, scanning parameters and the post-processing of green nuclear fuel pellets were also investigated. The cross-sectional views of the final pellet showed that the distribution of nuclear fuel microspheres in the pellet was very homogeneity.

Key words: dispersion nuclear fuel pellet, nuclear distribution, 3D printing, selective laser sintering

中图分类号:

廉超，郭林，常振旗. 3D打印制备核素分布高度均匀的弥散型陶瓷核燃料芯块[J]. 中国科学技术大学学报, 2020, 50(4): 436-441.

LIAN Chao, GUO Lin,CHANG Zhenqi. Fabrication of dispersion ceramic nuclear fuel pellets with a highly uniform distribution of nuclide by 3D printing[J]. Journal of University of Science and Technology of China, 2020, 50(4): 436-441.

参考文献

［1］
LIU X, QIAN D Z , ZHANG Z H, et al. The analysis of mechanical behavior for UMo/Al dispersion fuel on different fuel volume and burnup[J]. Advanced Materials Research, 2013, 721: 184-189.
[2] WRIGHT K E, HARP J, CAPRIOTTI L. Electron probe microanalysis of irradiated U-Pu-Zr fuel with added minor actinides[J]. Microscopy and Microanalysis, 2018, 24(S1): 2046-2047.
[3] MIWA S, OSAKA M. A practical fabrication method for the advanced heterogeneous fuel with magnesia containing minor actinides[J]. Journal of Nuclear Materials, 2009, 385(1): 165-167.
[4] CHEN C F, KELLY J, ASPHJEL , et al. Processing of ThO2/CeO2 Ceramic Fuel[J]. Journal of the American Ceramic Society, 2014, 97(10): 3062-3070.
[5] LIU M, LEE Y, RAO D V. Development of effective thermal conductivity model for particle-type nuclear fuels randomly distributed in a matrix[J]. Journal of Nuclear Materials, 2018, 508: 168-180.
[6] HUANG S H, LIU P, MOKASDAR A, et al. Additive manufacturing and its societal impact: A literature review[J]. International Journal of Advanced Manufacturing Technology, 2013, 67(5-8): 1191-1203.
[7] BERTRAND P, BAYLEAF, COMBE C, et al. Ceramic components manufacturing by selective laser sintering[J]. Applied Surface Science, 2007, 254(4): 989-992.
[8] 付旻慧,刘凯,刘洁,等. 碳化硅零件的激光选区烧结及反应烧结工艺[J].中国机械工程, 2018, 29(17): 2111-2118.
FU Minhui, LIU Kai, LIU Jie, et al. SiC components via SLS combined with reaction sintering[J]. China Mechanical Engineering, 2018, 29(17): 2111-2118.
[9] SHAHZAD K, DECKERSB J, BOURYET S, et al. Preparation and indirect selective laser sintering of alumina/PA microspheres[J]. Ceramics International, 2012, 38(2): 1241-1247.
[10] 余立华,业冬. 利用SLS技术烧制发动机缸盖水套砂芯[J]. 特种铸造及有色合金, 2018, 38(9): 988-990.
YU Lihua, YE Dong. Manufacturing of water jacket sand cores for truck cylinder head by SLS method[J]. Special Casting & Nonferrous Alloys, 2018, 38(9): 988-990.

()
()

3D打印制备核素分布高度均匀的弥散型陶瓷核燃料芯块

Fabrication of dispersion ceramic nuclear fuel pellets with a highly uniform distribution of nuclide by 3D printing

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价