[1] Kapoor S S. Roadmap for development of Accelerator Driven Sub-critical Reactor Systems (ADS): An interim report of the co-ordination committee on ADS[R]. Mumbai, Indina: Bhabha Atomic Research Centre, 2001: BARC/2001/R/004. [2] Saito S, Tsujimoto K, Kikuchi K,et al. Design optimization of ADS plant proposed by JAERI [J]. Nuclear Instruments and Methods in Physics Research A, 2006, 562: 646-649. [3] Knebel J U, Cheng X, Lefhalm C H. Design and corrosion study of a closed spallation target module of an accelerator-driven system (ADS)[J]. Nuclear Engineering and Design, 2000, 202: 279-296. [4] Schulenberg T, Cheng X, Stieglitz R. Thermal-hydraulics of lead bismuth for accelerator driven system[C] //The 11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-11). Avignon, France: Popes Palace Conference Center, 2005: Paper 159. [5] Wu Yican, Huang Qunying, Bai Yunqing, et al. Preliminary experimental study on the corrosion of structural steels in liquid lead bismuth loop[J]. 2010, 30(3): 238-243. 吴宜灿, 黄群英, 柏云清,等. 液态铅铋回路设计研制与材料腐蚀实验初步研究[J]. 核科学与工程, 2010, 30(3): 238-243. [6] Aiello A, Azzati M, Benamati G, et al. Corrosion behaviour of stainless steels in flowing LBE at low and high oxygen concentration [J]. Journal of Nuclear Materials, 2004, 335(2): 169-173. [7] Doubková A, Di Gabriele F, Brabec P, et al. Corrosion behavior of steels in flowing lead-bismuth under abnormal conditions [J]. Journal of Nuclear Materials, 2008, 376(3): 260-264. [8] Weisenburger A, Schroer C, Jianu A, et al. Long term corrosion on T91 and AISI1 316L steel in flowing lead alloy and corrosion protection barrier development: Experiments and models [J]. Journal of Nuclear Materials, 2011, 415(3): 260-269. [9] Schroer C, Voβ, Z, Wedemeyer O, et al. Oxidation of steel T91 in flowing lead-bismuth eutectic (LBE) at 550 ℃ [J]. Journal of Nuclear Materials, 2006, 356(1-3): 189-197. [10] Benamati G, Gessi A, Zhang P Z. Corrosion experiments in flowing LBE at 450 ℃ [J]. Journal of Nuclear Materials, 2006, 356(1-3): 198-202. [11] Zhang J. A review of steel corrosion by liquid lead and lead-bismuth[J]. Corrosion Science, 2009, 51(6): 1 207-1 227. [12] Gromov B F, Orlov Y I, Martynov P N, et al. Issues of technology of heavy liquid metal coolants (lead-bismuth and lead)[C]// Proceedings of Heavy Liquid Metal Coolants in Nuclear Technology, HLMC98, Obninsk, Russia, 1998. [13] Gorynin I V, Karzov G P, Markov V G, et al. Structural materials for power plants with heavy liquid metal as coolant[C]// Proceedings of Heavy Liquid Metal Coolants in Nuclear Technology, HLMC98, Obninsk, Russia, 1998. [14] Yachmenyov G S, Rusanov A E, et al. Problems of structural materials corrosion in lead-bismuth coolant[C] //Proceedings of Heavy Liquid Metal Coolants in Nuclear Technology, HLMC98, Obninsk, Russia, 1998. [15] Kurata Y, Futakawa M. Excellent corrosion resistance of 18Cr-20Ni-5Si steel in liquid Pb-Bi [J]. Journal of Nuclear Materials, 2004, 325(2-3): 217-222. [16] Illincev G, Karnik D, Paulovic M, et al. The impact of the composition of structural steels on their corrosion stability in liquid Pb-Bi at 500 and 400 ℃ with different oxygen concentrations [J]. Journal of Nuclear Materials, 2004, 335: 210-216. [17] Zhang J, Li N, Chen Y, et al. Corrosion behaviors of US steels in flowing lead-bismuth eutectic (LBE)[J]. Journal of Nuclear Materials, 2005, 336(1): 1-10. [18] Kurata Y, Futakawa M, Saito S. Corrosion behavior of steels in liquid lead-bismuth with low oxygen concentrations [J]. Journal of Nuclear Materials, 2008, 373(1-3): 164-178. [19] Zhang J, Li N. Review of the studies on fundamental issues in LBE corrosion [J]. Journal of Nuclear Materials, 2008, 373(1-3): 351-357. [20] Lyutyi E M. Problems of high-temperature liquid-metal corrosion of refractory metals and alloys [J]. Soviet Materials Science, 1988, 24(5): 441-445. [21] Kurata Y, Futakawa M, Saito S. Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb-Bi at 450 and 550 ℃ [J]. Journal of Nuclear Materials, 2005, 343: 333-340. |