中国科学技术大学学报 ›› 2013, Vol. 43 ›› Issue (2): 128-134.DOI: 10.3969/j.issn.0253-2778.2013.02.007
许松松
XU Songsong
摘要: 利用静电纺丝方法制备了聚己内酯(PCL)/石墨烯复合纳米纤维,对电纺纳米纤维的表面微观形貌、热性能和力学性能等进行了表征,并研究了石墨烯的加入量、PCL浓度、电纺电压、接收距离等参数对复合纤维性能的影响.研究结果表明:当加入石墨烯质量分数为027%时,得到的电纺纳米纤维的力学性能提高最大,拉伸强度增加486%,杨氏模量增加660%;当PCL质量分数为11%,电纺电压为28 kV,接收距离为35 cm,电纺液流速为6 mL/h时,电纺过程稳定,可以得到直径均匀的纳米纤维.