基于电化学-热耦合模型的21700型锂离子电池充放电过程热行为分析

doi:10.3969/j.issn.0253-2778.2020.05.012

中国科学技术大学学报 ›› 2020, Vol. 50 ›› Issue (5): 645-653.DOI: 10.3969/j.issn.0253-2778.2020.05.012

基于电化学-热耦合模型的21700型锂离子电池充放电过程热行为分析

徐文军，胡芃

中国科学技术大学热科学和能源工程系，安徽合肥 230027

收稿日期:2019-05-06 修回日期:2019-06-26 接受日期:2019-06-26 出版日期:2020-05-31 发布日期:2019-06-26
通讯作者: 胡芃
作者简介:徐文军，男，1994年生，硕士.研究方向：锂离子电池热管理及数值模拟.E-mail：megaxu@mail.ustc.edu.cn
基金资助:
中央高校基本科研业务费专项资金(WK2090130016)资助.

Thermal behavior analysis of 21700 type lithium ion battery during charge-discharge cycles based on electrochemical-thermal model

XU Wenjun, HU Peng

Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China

Received:2019-05-06 Revised:2019-06-26 Accepted:2019-06-26 Online:2020-05-31 Published:2019-06-26

摘要/Abstract

摘要： 锂离子电池具有比能量高、循环寿命长、输出功率大、可承受较宽充放电倍率等特点，已成为电动汽车领域电池开发的研究热点.锂离子电池在循环过程中的热行为对其性能、循环寿命和安全性有着较大的影响.本文基于21700圆柱形锂离子电池建立电化学-热耦合模型，并通过实验验证模型的精确性.分析了充电过程中的热行为，包含温度和产热分布. 结果表明，充电过程中的温升主要受恒流充电过程的影响，电池平均温度和总产热均呈先上升后下降的趋势，且电池不可逆热占比高于可逆热.通过对比充放电过程的温度分布和产热变化可知，恒流充电过程中的产热和温度均大于恒流放电过程，充电过程具有温度提升时间短、变化速度快、产热峰值高等特点.

关键词: 锂离子电池, 热行为, 电化学-热耦合模型, 充放电循环

Abstract: Lithium ion batteries have become a hotspot in the field of electric vehicles due to their excellent performance of high specific energy, long lifespan, high output power, and wide range of charge-discharge rates. The thermal behavior of the batteries during the charge-discharge cycle has a large impact on their performance, life cycle and safety. In this work, an electrochemical-thermal model is established based on a 21700 type cylindrical lithium ion battery, and corresponding experiments are conducted to validate the model. The thermal behavior during the charge process is analyzed, including the temperature and heat generation distribution. The results show that temperature rise in the charging process is mainly affected by the constant current charging process, the average temperature and heat generation of the battery both exhibit a trend of ascending first and descending later, and the irreversible heat shares a larger proportion of the total heat generation. The thermal behavior is contrasted between the charge and discharge process, and it is found that compared with the discharge process, the thermal behavior at the charge process has the characteristics of quick temperature change and high heat generation peaks.

Key words: lithium ion battery, thermal behavior, electrochemical-thermal model, charge-discharge cycle

中图分类号:

TM912

徐文军，胡芃. 基于电化学-热耦合模型的21700型锂离子电池充放电过程热行为分析[J]. 中国科学技术大学学报, 2020, 50(5): 645-653.

XU Wenjun, HU Peng. Thermal behavior analysis of 21700 type lithium ion battery during charge-discharge cycles based on electrochemical-thermal model[J]. Journal of University of Science and Technology of China, 2020, 50(5): 645-653.

参考文献

［1］ BRESSER D, HOSOI K, HOWELL D, et al. Perspectives of automotive battery R&D in China, Germany, Japan, and the USA[J]. J. Power Sources, 2018, 382: 176-178.
［2］程涛, 王欣媛, 王向阳, 等. 轻质、高稳定石墨纸锂离子电池负极集流体[J]. 中国科学技术大学学报, 2017, 47(12): 971-977.
CHENG Tao， WANG Xinyuan， WANG Xiangyang， et al. Light weight and highly stable graphite paper as anode current collectors for lithium ion batteries[J].Journal of University of Science and Technology of China, 2017, 47(12): 971-977.

［3］ WANG Q, PING P, ZHAO X, et al. Thermal runaway caused fire and explosion of lithium ion battery[J]. Journal of Power Sources, 2012, 208: 210-224.
［4］ YUN F L, TANG L, LI W C, et al. Thermal behavior analysis of a pouch type Li［Ni0.7Co0.15Mn0.15］O2-based lithium-ion battery[J]. Rare Metals, 2016, 35(4): 309-319.
［5］ XU M, ZHANG Z, WANG X, et al. Two-dimensional electrochemical-thermal coupled modeling of cylindrical LiFePO4 batteries[J]. Journal of Power Sources, 2014, 256: 233-243.
［6］ DU S, LAI Y, AI L, et al. An investigation of irreversible heat generation in lithium ion batteries based on a thermo-electrochemical coupling method[J]. Applied Thermal Engineering, 2017, 121: 501-510.
［7］ PENG P, JIANG F. Thermal safety of lithium-ion batteries with various cathode materials: A numerical study[J]. International Journal of Heat and Mass Transfer, 2016, 103: 1008-1016.
［8］李腾, 林成涛, 陈全世. 锂离子电池热模型研究进展[J]. 电源技术, 2009, 33(10): 927-932.
LI Teng, LIN Chengtao, CHEN Quanshi. Research development on lithium-ion battery thermal model[J]. Chinese Journal of Power Sources, 2009,33(10): 927-932.
［9］ AL-HALLAJ S, SELMAN J R. Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications[J]. Journal of Power Sources, 2002, 110(2): 341-348.
［10］ ONDA K, OHSHIMA T, NAKAYAMA M, et al. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles[J]. Journal of Power sources, 2006, 158(1): 535-542.
［11］ DOYLE M, NEWMAN J, GOZDZ A S, et al. Comparison of modeling predictions with experimental data from plastic lithium ion cells[J]. Journal of the Electrochemical Society, 1996, 143(6): 1890-1903.
［12］ DOYLE M, FULLER T F, NEWMAN J. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell[J]. Journal of the Electrochemical Society, 1993, 140(6): 1526-1533.
［13］ GU W B, WANG C Y. Thermal-electrochemical modeling of battery systems[J]. Journal of The Electrochemical Society, 2000, 147(8): 2910-2922.
［14］ CHEN S C, WAN C C, WANG Y Y. Thermal analysis of lithium-ion batteries[J]. Journal of Power Sources, 2005, 140 (1): 111-124.
［15］ KIM G H, PESARAN A, SPOTNITZ R. A three-dimensional thermal abuse model for lithium-ion cells[J]. Journal of Power Sources, 2007, 170(2): 476-489.
［16］ LAI Y, DU S, AI L, et al. Insight into heat generation of lithium ion batteries based on the electrochemical-thermal model at high discharge rates[J]. International Journal of Hydrogen Energy, 2015, 40(38): 13039-13049.
［17］ DONG T, PENG P, JIANG F. Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations[J]. International Journal of Heat and Mass Transfer, 2018, 117: 261-272.
［18］ MEI W, CHEN H, SUN J, et al. Numerical study on tab dimension optimization of lithium-ion battery from the thermal safety perspective[J]. Applied Thermal Engineering, 2018, 142: 148-165.
［19］ MEI W, CHEN H, SUN J, et al. The effect of electrode design parameters on battery performance and optimization of electrode thickness based on the electrochemical-thermal coupling model[J]. Sustainable Energy & Fuels, 2019, 3: 148-165.
［20］ EDDAHECH A, BRIAT O, VINASSA J M. Thermal characterization of a high-power lithium-ion battery: Potentiometric and calorimetric measurement of entropy changes[J]. Energy, 2013, 61: 432-439.
［21］ WU M S, WANG Y Y, WAN C C. Thermal behaviour of nickel/metal hydride batteries during charge and discharge[J]. Journal of Power Sources, 1998, 74(2): 202-210.
［22］ CHEN Y, EVANS J W. Thermal analysis of lithium polymer electrolyte batteries by a two dimensional model-thermal behaviour and design optimization[J]. Electrochimica Acta, 1994, 39(4): 517-526.

()
()

[1]	齐家新，王星博，苏晓智，解晖，REHMANZiaur，陶石，储旺盛. 局域结构优化Li-Ni-Te-O正极的电化学可逆性[J]. 中国科学技术大学学报, 2019, 49(4): 259-267.
[2]	吴桂贤，赵海峰，黄伟峰，陶石，张凌铭，余蓁，储旺盛，韦世强. 基于同步辐射的X射线吸收谱探讨LiFexMn1-xO2的精细结构[J]. 中国科学技术大学学报, 2017, 47(5): 369-376.
[3]	黄涛，李晓娜，杨则恒. 多孔氧化镍纳米颗粒的制备及其电化学性能研究[J]. 中国科学技术大学学报, 2017, 47(5): 385-391.
[4]	张猛，陶石，黄伟峰，宋礼，吴自玉，储旺盛. 从头计算确定FeAs超导层能够作为锂离子电池的新型负极材料[J]. 中国科学技术大学学报, 2015, 45(5): 353-358.
[5]	钟国彬，苏伟，刘世念，臧永，陈春华. 基于尖晶石正极材料的柔性锂离子电池的制备和测试[J]. 中国科学技术大学学报, 2013, 43(2): 151-155.
[6]	姚晓林，张承平，陈春华. LiNixMn2-xO4对锂离子电池材料 LiCoO2的表面改性研究[J]. 中国科学技术大学学报, 2009, 39(4): 375-379.

基于电化学-热耦合模型的21700型锂离子电池充放电过程热行为分析

Thermal behavior analysis of 21700 type lithium ion battery during charge-discharge cycles based on electrochemical-thermal model

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价